Nibs (side handles) are one of the most commonly damaged components of vintage snaths, usually from splitting of the wood due to over-tightening in an attempt to clamp down the nib band on a section of wood that has either shrunken or become crushed. The next most common issue is that the nib band and threaded rod have become severely corroded and weakened. Still other units may be missing a nib entirely!
In any instance where the nib needs to be replaced, a good vintage one can be hard to find. Fortunately Seymour Manufacturing still makes these ones! Features an iron band and threaded rod, aluminum block, and hardwood grip, with a traditional left-handed thread (turn left to tighten and right to loosen!) to prevent loosening from use. Seymour's stock of original nib blocks was exhausted by recent sales and are now unavailable. Fortunately we were able to have our own--arguably superior--blocks manufactured for us from radially laser-cut seamless heavy-walled aluminum tubing for an attractive appearance and secure grip on the snath. The excess threaded rod is left in case you need to adjust the size of the band during fitting, but should be cut flush with a hacksaw, cutoff wheel, or bolt cutters and filed smooth after installation.
This nib is sized to function as the upper grip for most snaths. The inner diameter is about 1.25" as it comes from the factory, but the loop may be hammered smaller or slightly larger. If desired, we may be able to do this resizing for you for a small additional fee--write us at email@example.com to inquire!